Please ensure Javascript is enabled for purposes of website accessibility

Arm Support for Joystick --- Support de Bras pour Joystick

Information sur le projet
  • Technologies possibles impliquées:
    Laser cutting, 3D printing, sewing.
    ---
    Découpe laser, impression 3D, couture.
  • Type de projet: Spécifique au client / Client Specific
  • Budget prévu pour le prototype: $50
  • Coût prévu du projet cost: $50
Information sur le client
Please sign in to view client info.
Contexte du projet
This Client's son uses a manual wheelchair currently however they would like to be able to give him more independence and be able to use a power wheelchair. He currently cannot use a joystick because of his random arm movements. The client would like to be able to get him to practice using a joystick to control a toy or something similar but needs a way to safely restrain the arm to accurately control the joystick.

Your task is to design an arm support system to be able to restrain arm movement enough to use a stationary joystick. The system must not cause injury to the arm but must be strong enough to limit movement. It must also be mounted to the manual wheelchair in a way that allows joystick use. It must be able to be installed in a way that can accommodate either the right or left arm. It must be easy to install and use. It should be washable and safe for skin contact. Ideally it should be adaptable enough to continue to fit a growing child.

-------------------------------------------------------
Le fils de ce client utilise actuellement un fauteuil roulant manuel, mais elle aimerait pouvoir lui donner plus d'indépendance et pouvoir utiliser un fauteuil roulant électrique. Il ne peut actuellement pas utiliser de joystick en raison des mouvements aléatoires de son bras. Le client aimerait pouvoir lui faire pratiquer l'utilisation d'un joystick pour contrôler un jouet ou quelque chose de similaire, mais il a besoin d'un moyen de retenir le bras en toute sécurité pour contrôler le joystick avec précision.

Votre tâche consiste à concevoir un système de support de bras capable de restreindre suffisamment le mouvement du bras pour utiliser un joystick fixe. Le système ne doit pas blesser le bras, mais doit être suffisamment solide pour limiter les mouvements. Il doit également être monté sur le fauteuil roulant manuel de manière à permettre l'utilisation du joystick. Il doit pouvoir être installé de manière à pouvoir accueillir le bras droit ou gauche. Il doit être facile à installer et à utiliser. Il doit être lavable et sans danger pour le contact avec la peau. Idéalement, il doit être suffisamment adaptable pour continuer à s'adapter à un enfant en pleine croissance.
Tentatives précédentes
There has been no previous attempt to solving this problem. / Il n'y a pas de tentatives précédentes pour résoudre ce problème.

Arm Support for Joystick --- Support de Bras pour Joystick

Proposé par jboud030

Proposé le Aug 9 2024

Contact: makerlab@uottawa.ca

Categories

GNG2101/GNG2501

Projet Créé A Partir De Cette Proposition:

6 mois ago